Description
Uni-Ram URS900 6.6 Gallon 240V Aluminum Solvent Recycler w/ Digital Display
The Uni-Ram URS900 6.6 Gallon 240V Aluminum Solvent Recycler w/ Digital Display is a versatile and efficient solvent recycling system that can be used in a variety of applications. It features a number of advanced safety features and digital controls that make it easy to use and maintain.
Key Features
- High limit heater thermostat
- Condenser temperature monitor
- Inner lid and outer safety cover for distillation tank
- Fan motor thermostat with automatic reset
- Tank lid with built in Pressure relief valve
- Safe electronic circuitry
- Tank temperature sensor w/micro processor control
- Safety cycle limit timer (6 hour duration)
- Solvent receiver pail stored inside recycler cabinet
Applications
The Uni-Ram URS900 6.6 Gallon 240V Aluminum Solvent Recycler w/ Digital Display can be used to recycle a variety of solvents, including:
- Acetone
- Alcohol
- Ethyl Ether
- Toluene
- Xylene
- Methanol
- Water
Benefits
The Uni-Ram URS900 6.6 Gallon 240V Aluminum Solvent Recycler w/ Digital Display offers a number of benefits, including:
- Save money by recycling solvents
- Reduce waste disposal costs
- Protect the environment by recycling solvents
- Improve safety by reducing the risk of fire and explosions
- Extend the life of your solvents
Specifications
- Tank Capacity: 6.6 US Gal (25 litres)
- Speed: 6.6 US Gal in about 4-6 hours
- Solvent Transfer: Manual transfer
- Air Pressure: Not applicable
- Power Supply: 220/240V, 2200W, 9.3A
- Heater: 2100W
Enhanced Control Features and Digital Display
The Uni-Ram URS900 6.6 Gallon 240V Aluminum Solvent Recycler w/ Digital Display features a number of enhanced control features and digital display that make it easy to use and maintain. These features include:
- Easy settings for dryer waste residue
- Automatic or timed heater shut-off
- Maximum temperature set points in ° or °F
- Regulation of the rate of recycling using heating power percentage
URS900EP2 solvent recycler
The URS900EP2 solvent recycler provides a shop with clean recycled solvent every day. Typical solvents include paint thinner, gun wash solvent and acetone. With a Uni-ram solvent recycler the shop’s environmental footprint shrinks and the shop saves money. Solvent purchases and the cost for used solvent transported off-site drop by approximately 90%.
The URS900EP2 provides 6.6 gal of clean recycled solvent from each recycling batch.
| FEATURE | URS900EP2 | URS500 |
| Voltage Input | 220-240V | 110-120V |
| Heating Element | 2100 W | 1500 W |
| Tank Capacity | Â 5 gal, 25L | 5 gal , 19L |
| Computer display with menu showing additional features | Yes |  No |
The URS900EP2 is for owners that want features not offered on the basic URS500 solvent recycler. Features on the URS900EP2, not on the URS500 are:
- Recycling is faster with the URS900EP2 due to a 2100W heating element vs 1500W heating element on the URS500. It also has a larger cooling condenser.
- Sophisticated solid-state microprocessor controls the work flow and continuously monitors operating parameters. The computer display (LCD) shows the set point and real-time temperatures at the tank and condenser. Special features in the computer menu allow for:
1) lowering of the heater wattage to make the boiling phase less vigorous; this is important for low boiling point solvents such as acetone.
2) increasing the post heat time to make the solvent residue dryer thus increasing recycling efficiency.
- Complete self-diagnostic system; sensors monitor the operating system; faults are described in English messages for easy diagnostics. Faults are indicated by flashing lights on the URS500.
- Odometer logging to tell how much solvent has been processed and money saved.
Safety Features:
- Certified to UL safety standard 2208 and CSA standard 22.2 no. 30 and 88 by ETL for use with solvents in Class 1, Division 1, group D locations. UL2208, with many built in safety programs, is the safety standard for solvent recyclers.
- Additional safety features include the lid pressure relief system, safety cover and optional lid lock.
The work shop of all collision repairs shop is classified as a class 1 division 2 by the National Electrical Code, due to the intermittent presence of solvent vapors. The paint mixing room is classified as the more stringent class 1 division 1 area, as solvent vapors are normally present. Uni-ram solvent recyclers are approved for use in all collision repair shops, other class 1 division 1 and 2 locations and non classified locations.
IMPORTANT SAFETY AND USAGE ADVISORY
Do not recycle solvents that includes Nitrocellulose due to its low auto ignition temperature and Peroxides due to its thermal decomposition. Check the Safety Data Sheet of both the solvent and waste material for the presence of these 2 substances.
- Shipping Dimensions: 30″ w x 20″ d x 45″ h.
- Shipping Weight 150 lb.
- Product Dimensions: 28″ w x 17″ d x 43″ h.
