Description
Uni-Ram U100-S Pressure Sand Blaster
The Uni-Ram U100-S Pressure Sand Blaster is a powerful tool that can be used to blast away rust, paint, and other unwanted deposits. It is ideal for use in refinishing vehicles, boats, monuments, brick buildings, and industrial equipment. The sand blaster is portable and comes complete with a Safety Shut-off for operation safety. Filling the tank with abrasive is quick and easy, and the abrasive capacity is about 100 lb.
Key Features
- Blasts away rust, paint, and other unwanted deposits
- For use with with abrasives including silica sand, glass beads, metal shot, aluminum oxide and nut shells
- The Sand Blaster abrasive penetrates into the deepest pitted area to remove rust. Readies the surface for priming
- Ideal for use in refinishing vehicles, boats, monuments, brick buildings and industrial equipment
- Portable
- Comes complete with Safety Shut-off for operation safety
- Filling tank with abrasive is quick and easy
- Abrasive capacity about 100 lb
Applications
- Refinishing vehicles
- Refinishing boats
- Refinishing monuments
- Refinishing brick buildings
- Refinishing industrial equipment
Benefits
- Removes rust, paint, and other unwanted deposits
- Ideal for use in a variety of applications
- Portable and easy to use
Features
- High flow, 4 ply, 1/2 inch heavy duty hose.
- Abrasive gun with Safety Shut Off Valve, a unique Uni-ram design, to terminate air and abrasive flow.
- Tank size is 8.5 US gallons.
- Pressure Relief Valve, Pressure Gage and cutoff valves for supply air, abrasive and air passage to abrasive.
MODELS
| Economical U100-S | U103-S
|
| Complete with 8 ft, 4 ply, heavy duty
1/2” hose, clamped securely to Blast Gun. |
Complete with: 10 ft, 4 ply heavy duty 1/2” hose, quick disconnect fittings on hose and blaster to eliminate a blockage, pressure regulator, moisture filter, 3 seal blocks and 3 1/8” ceramic nozzles. |
Operation
Filling tank with Abrasive is quick and easy:
- Pour abrasive with ease into Built-In Funnel
at top of tank.
- Return maintenance free Removable Filler Plug and apply air pressure, which forces plug upward and seals tank.
Blasting Abrasive
- Open Air Inlet Shut-Off Valve all the way on side of tank.
- Adjust Abrasive Control Valve on bottom of tank. This regulates the mixture of air to abrasive.
- Squeeze Safety Shut-Off Valve to activate flow of abrasive.
Abrasives include: glass beads, metal shot, aluminum oxide and nut shells.
NOTE: Uni-ram recommends against the use of coal and other slag products that may contain and expose the user to intrinsically hazardous dusts, such as beryllium.
Appropriate protective equipment should be worn at all times during blasting operations.
The Safety Shut-Off is an innovative Uni-ram design. Releasing lever terminates abrasive flow for operator safety.
