U100-S, ABRASIVE BLASTER
Dirt, Rust, Paint and Unwanted Deposits to prepare surface for repair and painting.
The abrasive from the high flow, 10 Gallon, 100 pound U100-S penetrates the deepest pitted area to remove dirt, rust, paint and unwanted deposits. Readies the surface for priming and filler. Ideal for refinishing vehicles, boats, monuments, brick buildings and industrial equipment.
|Complete with 8 ft, 4 ply, heavy duty
1/2” hose, clamped securely to Blast Gun.
|Complete with: 10 ft, 4 ply heavy duty 1/2” hose, quick disconnect fittings on hose and blaster to eliminate a blockage, pressure regulator, moisture filter, 3 seal blocks and 3 1/8” ceramic nozzles.
Filling tank with Abrasive is quick and easy:
at top of tank.
Abrasives include: glass beads, metal shot, aluminum oxide and nut shells.
NOTE: Uni-ram recommends against the use of coal and other slag products that may contain and expose the user to intrinsically hazardous dusts, such as beryllium.
Appropriate protective equipment should be worn at all times during blasting operations.
The Safety Shut-Off is an innovative Uni-ram design. Releasing lever terminates abrasive flow for operator safety.
|Part Number||Nozzle Inside Dia. (in)||Compressor (hp)||CFM@80 PSI||Abrasive Consumption (lb/hr)||Surface Blasting
(sq ft per minute)
|10-260||1/8||10||20||150-170||1 to 1.5|
See brochure for a more inclusive table.