Description

UA400W Spray Gun Cleaner cleans waterborne spray guns using the automatic cleaning cycle.

The automatic cleaning cycle consists of automatic wash using the 4″ diaphragm pump, air rinse and clean rinse. The Flow-through brush is used to remove hardened overspray from the spray gun.

Features:

• Top loading. Cleans 2 spray guns in 5 minutes.
• Wash Tank is constructed from stainless steel for longer life. The tank size is 17.25″ w x 13.5″ d x 14″h. (44cm w x 34cm d x35cm h).
• Washing is activated by a wash timer and powered by a long lasting dual diaphragm pump that outputs 3.7 gallons of water per minute.
• Injection of air into the wash water stream creates micro-agitation to break up waterborne paint on the surface of the spray gun.
• Mounting adapters fit popular conventional cup systems and disposable cup systems to deliver water to thoroughly wash the paint channel.
• 14 swirl action jets deliver cleaning water to wash the outside of the spray guns.
• Pump halts immediately if the lid is raised during cleaning, to prevent exposure to solvent, providing a safe operation.
• Stainless steel mesh filter keeps water cleaner and debris from reaching the diaphragm pump.
  • Plastic Cone prevents water from entering air passage way. Cone also provides positive air flow through air passage way to keep water from entering at the cap.
  • Lower cabinet is powder-coated paint on mild steel with a securely closing door, a floor and leveling feet.
  • Closing drain valve located under the cleaning tank prevents water spillage when refilling the wash pail.
  • The flow of water through the brush is activated by a foot pedal and powered by a 2″ dual diaphragm pump. Flow is adjustable.
  • Comes with 2 HDPE pails inside the cabinet, trigger clamps and SOPs.
  • Customer disposes of dirty water in accordance with local requirements.
  • CE Approved.

Operation:

• Place the spray gun on the mounting adapter in the cleaning tank and turn the automatic timer. A 4-inch diaphragm pump drives cleaning water up through 1) the mounting adapters to flush the paint channel of the spray  gun and 2) through 14 spray jets to  wash overspray from the outside of the gun. Water drains back into the customer supplied pail, for reuse, a green approach.
• Press the air rinse button to flush the wash water and then press the clean rinse button to send 100 CC of clean water through the jets to rinse the spray guns. Two guns are cleaned in 5 minutes.