A solventborne gun cleaner cleans spray guns used with primers and clear coats. The UM120W complements the solventborne spray gun cleaner as the UM120W cleans the guns for the waterborne base coat.
Wash gun delivers high pressure clean water to flush the paint channel in under 10 seconds.
Flow-through brush removes overspray from the outside of the gun.
Both cleaning tools are activated by a foot pedal and powered by a 2″ diaphragm pump with a flow control.
Air gun dries the spray gun and a spray out verifies a clean paint channel.
Complete with 1 quart of California-friendly AQUA KLEEN PGC (102-8200) concentrate which enhances the cleaning power of water.
The “GREEN” Water Recovery System features filtering the used water after treatment with Uni-ram’s flocculating agent, COAGKLEEN Recovered, clean water may be reused multiple times, minimizing water consumption, or disposed of in accordance with local regulations.
one 2.2 lb container of COAG KLEEN flocculant powder (102- 8300) and 2 filters used in the “GREEN” Water Recovery System.
Patent No. 4,785,836 in USA. Many Patents in place in other countries.
Compact size at 19”W X 22”D X 46”H 72 lb / 33 KG to fit into a crowded mixing room.
Wash tank constructed from 304-grade stainless steel for longer life.
The painter flushes the spray gun using the water gun into a supplied, stainless steel EPA 6H compliant spray capture tube, in under 10 seconds. Most painters get around 30 spray gun cleanings from the 5 gallons of clean, AQUA KLEEN PGC enriched water. The flow-through brush removes over spray and the blow gun dries the spray gun. Dirty water drains into a reservoir and is later treated with COAGKLEEN FP, then filtered for reuse.
AQUA-KLEEN PGC, (part number 102-8200), is used to effectively cut and dissolve paint from spray guns. Mix 1 container of AQUA-KLEEN PGC with 5 gal (20 L) of water . Many shops effectively clean spray guns with the same solution for 3 months or more before reclaiming the solution.
COAG-KLEEN FP, (part number 102-8300) is a flocculant used in the water reclaim system on the UM120W and the UG5000W. The clean, recovered water can be reused several times before disposal. The separated paint waste, when dry, is then disposed of in accordance with local regulations. Benefit: Lower disposal costs since the water can be reused several times before disposal. Shop Operations becomes “Greener”. To use, add 2 scoops of COAG-KLEEN FP powder per 5 gal (20L) of spent water. Agitate for 5 minutes then drain through the Uni-ram COAG-KLEEN FP filter system. It removes the absorbed waste paint solids from the water used to clean spray guns. Primary Filter Pad 102-8125 Secondary Filter Pad 102-8126
Requires minimum of 85 PSI, 2 CFM of clean dry air. Pressure regulator is built in.
Pump for water gun and brush: 2″ dual diaphragm pump with unique shuttle valve for long life, output is 1.9 gal/min (7 L/min).
Cleans waterborne paint from gravity spray guns with both disposable cup systems and conventional cup systems.
Shipping Dimensions: 22″w x 17″d x 45″h (56cm w x 43cm d x 114cm h) Shipping Weight: 70 lb (32 kg).
Product Dimensions: 17.4″w x 13.6″d x 43.3″h (44cm w x 34.5cm d x 110.0cm h)