UG5000W

is our most popular spray gun cleaner. Spray guns for primers and clear coat paints are cleaned in the solvent tank and spray guns for waterborne base coat are cleaned in the water tank. The UG5000W meets all the spray gun cleaning needs of the shop in one cabinet. Two spray gun cleaners in a shop will use 2 airlines and occupies more space than a UG5000W.

Solvent Tank (Left Side)

The automatic cleaning cycle in the solvent tank consists of automatic wash using the 4″ diaphragm pump, air rinse and clean rinse. The Flow-through brush is used to remove hardened overspray from the spray gun.

Features:

• Top loading. Cleans 2 spray guns in under 1 minute.
  • Wash Tank is constructed from stainless steel for longer life. The tank size is 17.25″ w x 13.5″ d x 14″h. (44cm w x 34cm d x35cm h).
  • Washing is activated by a wash timer and powered by a long-lasting dual diaphragm pump that outputs 3.7 gallons of solvent per minute.
  • The flow of solvent through the brush is activated by a foot pedal and powered by a 2″ dual diaphragm pump. Flow is adjustable.
  • Mounting adapters fit popular conventional cup systems and disposable cup systems to deliver solvent to thoroughly wash the paint channel.
  • 14 swirl action jets deliver solvent to wash the over spray from the spray guns.
• The pump halts immediately if the lid is raised during cleaning, to prevent exposure to solvent, providing a safe operation.
  • Stainless steel mesh filter keeps solvent cleaner and keeps debris from reaching the diaphragm pump.
  • Plastic Cone prevents solvent from entering air passageway. Cone also provides positive air flow through the air passageway to keep solvent from entering at the cap.
  • Fume extractor automatically removes solvent fumes from the work area when the lid is raised for a healthier work environment.
  • Lower cabinet is powder-coated paint on mild steel with a closing door, floor and adjustable feet.
  • Closing the drain valve located under the cleaning tank prevents solvent spillage when refilling the wash pail.
  • Comes with 2 solvent pails inside the cabinet, trigger clamps and SOPs.
  • CE Approved.

Operation:

• Place the spray gun on the mounting adapter in the cleaning tank and turn the automatic timer. A 4 inch diaphragm pump drives solvent up through 1) the mounting adapters to flush the paint channel of the spray gun and 2) through 14 spray jets to  wash overspray from the outside of the gun. Solvent drains back into the wash pail, for reuse, a green approach.
• Press the air rinse button to flush the wash solvent and then press the clean rinse button to send 100 CC of clean solvent through the jets to rinse the spray guns. Two guns are cleaned in 1 minutes.

 Water Tank (Right Side)

Manual cleaning consists of flushing the paint channel with the water gun, washing the overspray from the gun with the brush and drying the gun with the blow gun.

Features:

• Wash gun delivers high pressure clean water to flush the paint channel in under 10 seconds.
• Flow-through brush removes overspray from the outside of the gun.
• Both cleaning tools are activated by a foot pedal and powered by a 2″ diaphragm pump with a flow control.
• Air gun dries the spray gun and a spray out verifies a clean paint channel.
• Complete with 1 quart of California-friendly AQUA KLEEN (102-8200). The cleaning power of water is enhanced when a half-bottle of AQUA KLEEN is added to the 2.5 gallons of water in the pail.
• The “GREEN” Water Recovery System features filtering the used water following treatment with Uni-ram’s flocculating agent, COAGKLEEN Recovered clean water may be reused multiple times before disposal, minimizing water consumption, a green approach.
• One 2.2 lb container of COAG KLEEN flocculant crystals (102- 8300) and 2 filters are used in the “GREEN” Water Recovery System.
• For use with waterborne paints only.
• Patent No. 4,785,836 in USA. Many Patents in place in other countries.
• Wash tank constructed from 304 grade stainless steel for longer life.

Operation:

• The painter flushes the spray gun using the water gun into a supplied, stainless steel EPA 6H compliant spray capture tube in under 10 seconds. Most painters can get around 30 spray gun cleanings from the 5 gallons of clean, AQUA KLEEN enriched water. The flow-through brush removes overspray and the blow gun dries the spray gun. Dirty water drains into a reservoir and is later treated with COAGKLEEN FP then filtered. The clean filtered water is reused for cleaning spray guns.