is our most popular spray gun cleaner. Spray guns for primers and clear coat paints are cleaned in the solvent tank and spray guns for waterborne base coat are cleaned in the water tank. The UG5000W meets all the spray gun cleaning needs of the shop in one cabinet. One work station is more efficient than 2 separate work stations. The shop saves space and the uses one less airline.
Solvent Tank (Left Side)
The automatic cleaning cycle in the solvent tank consists of automatic wash using the 4″ diaphragm pump, air rinse and clean rinse. The Flow-through brush is used to remove hardened over spray from the spray gun.
Water Tank (Right Side)
Manual cleaning consists of flushing the paint channel with the water gun, washing the overspray from the gun with the brush and drying the gun with the blow gun.
Benefit: Lower disposal costs since the water can be reused several times before disposal. Shop Operations becomes “Greener”.
To use, add 2 scoops of COAG-KLEEN FP powder per 5 gal (20L) of spent water. Agitate for 5 minutes then drain through the Uni-ram COAG-KLEEN FP filter system. It removes the absorbed waste paint solids from the water used to clean spray guns. Primary Filter Pad: 102-8125 Secondary Filter Pad: 102-8126
Uni-ram Head Office381 Bentley Street, Markham, OntarioCanada L3R-9T2Tel: 1-800-417-9133 Fax: 905-477-8922
Uni-ram Head Office381 Bentley StreetMarkham, OntarioCanada L3R-9T21-800-417-9133